system ratings standby DS60D6Sga DS60D6Sda DS60D6Spa DS60D6Sja DS60D6Sva DS60D6Sra DS60D6Sna voltage (l-l) 240v** 240v** 208v** 240v** 380v** 480v** 600v** phase 1 1 3 3 3 3 3 pf 1.0 1.0 0.8 0.8 0.8 0.8 0.8 hz 60 60 60 60 60 60 60 kw 60 61 63 63 60 60 60 kva 60 61 78 78 75 75 75 amps 250 254 218 189 114 90 72 skva@30% voltage dip 119 130 200 200 266 173 136 generator model* 362csl1604 361csl1613 361csl1602 361csl1602 361csl1602 361csl1601 361psl1633 temp rise 130 c/40 c 130 c/40 c 130 c/40 c 130 c/40 c 130 c/40 c 130 c/40 c 130 c/40 c connection 12 lead 12 lead 12 lead 12 lead 12 lead double delta 4 lead low wye hi delta hi wye hi wye 4 lead wye ** ul 2200 o ? ered diesel generator set DS60D6S 60 kwe / 60 hz / standby 208 - 600v (reference dp55d6s for prime rating technical data) // ? emissions ? epa tier 3 certi ed // ? generator set is designed and manufactured in facilities certi ed to standards iso 9001:2008 and iso 14001:2004 // ? ul 2200 / csa ? optional ? ul 2200 listed ? csa certi ed // ? performance assurance certification (pac) - generator set tested to iso 8528-5 for transient response - veri ed product design, quality and performance integrity - all engine systems are prototype and factory tested // ? power rating - accepts rated load in one step per nfpa 110 certifications and standards
2 // / ? / DS60D6S // ? engine air cleaner oil pump oil drain extension & s/o valve full flow oil filter fuel filter with water separator jacket water pump thermostat blower fan & fan drive radiator - unit mounted electric starting motor - 12v governor ? mechanical droop base - formed steel sae flywheel & bell housing charging alternator - 12v battery box & cables flexible fuel connectors flexible exhaust connection epa certi ed engine // ? generator nema mg1, ieee and ansi standards compliance for temperature rise and motor starting self-ventilated and drip-proof superior voltage waveform solid state, volts-per-hertz regulator 1% voltage regulation no load to full load brushless alternator with brushless pilot exciter 4 pole, rotating field 130 c maximum standby temperature rise 1 bearing, sealed flexible coupling full amortisseur windings 125% rotor balancing 3-phase voltage sensing 100% of rated load - one step 5% maximum total harmonic distortion // ? digital control panel(s) digital metering engine parameters generator protection functions engine protection windows ? -based software multilingual capability remote communications to rdp-110 remote annunciator programmable contact inputs programmable contact outputs ul recognized, csa certi ed, ce approved event recording ip 54 front panel rating with integrated gasket nfpa110 compatible standard equipment* // ? mtu onsite energy is a single source supplier // ? global product support // ? 2 year standard warranty // ? 4045hf280 diesel engine - 4.5 liter displacement - mechanical injection pump - 4-cycle // ? engine-generator resilient mounted // ? complete range of accessories // ? generator - brushless, rotating field generator - 2/3 pitch windings - 300% short circuit capability with optional pmg // ? digital control panel(s) - ul recognized, csa certi ed, nfpa 110 - complete system metering - lcd display // ? cooling system - integral set-mounted - engine driven fan standard features* * represents standard product only. consult factory/mtu onsite energy distributor for additional con gurations.
3 // / ? / DS60D6S // ? engine manufacturer john deere model 4045hf280 type 4-cycle arrangement 4-inline displacement: l (in 3 ) 4.5 (275) bore: cm (in) 10.6 (4.19) stroke: cm (in) 12.7 (5.0) compression ratio 19.0:1 rated rpm 1,800 engine governor mechanical droop maximum power: kwm (bhp) 74 (99) speed regulation 0.50% air cleaner dry // ? liquid capacity (lubrication) total oil system: l (gal) 13 (3.4) engine jacket water capacity: l (gal) 8.5 (2.3) system coolant capacity: l (gal) 16.7 (4.4) // ? electrical electric volts dc 12 cold cranking amps under -17.8 c (0 f) 925 // ? fuel system fuel supply connection size 3/8? npt fuel return connection size 3/8? npt maximum fuel lift: m (ft) 1.8 (6) recommended fuel diesel #2 total fuel flow: l/hr (gal/hr) 113 (29.9) // ? fuel consumption standby at 100% of power rating: l/hr (gal/hr) 19.3 (5.1) at 75% of power rating: l/hr (gal/hr) 14.8 (3.9) at 50% of power rating: l/hr (gal/hr) 10.6 (2.8) // ? cooling - radiator system standby ambient capacity of radiator: c (f) 50 (122) maximum allowable static pressure on rad. exhaust: kpa (in. h 2 0) 0.12 (0.5) water pump capacity: l/min (gpm) 144 (38) heat rejection to coolant: kw (btum) 35 (1,979) heat rejection to air to air: kw (btum) 5 (278) heat radiated to ambient: kw (btum) 10.9 (619) fan power: kw (hp) 1.16 (1.55) // ? air requirements standby aspirating: *m 3 / min (scfm) 5.4 (191) air flow required for rad. cooled unit: *m 3 / min (scfm) 91 (3,162) remote cooled applications; air flow required for dissipation of radiated gen-set heat for a max of 25 f rise: *m 3 / min (scfm) 40 (1,396) * air density = 1.184 kg/m 3 (0.0739 lbm/ft 3 ) // ? exhaust system standby gas temp. (stack): c (f) 545 (1,013) gas volume at stack temp: m 3 / min (cfm) 14.4 (508) maximum allowable back pressure: kpa (in. h 2 0) 7.5 (30) minimum allowable back pressure: kpa (in. h 2 0) n/a application data
4 // / ? / DS60D6S ? mtu onsite energy. subject to alteration due to technological advances. oe 23 460 (77 3e) 2014-01 v.2 weights and dimensions sound data unit type standby full load level 0: open power unit db(a) 73 system dimensions (l x w x h) weight (dry/less tank) open power unit (opu) 1,873 x 800 x 1,232 mm (73.75 x 31.50 x 48.50 in) 964 kg (2,120 lb) drawing above for illustration purposes only, based on standard open power 480 volt generator set. lengths may vary with other voltages. do not use for installation design. see website for unit speci c template drawings. weights and dimensions are based on open power units and are estimates only. consult the factory for accurate weights and dimen sions for your speci c generator set. materials and speci cations subject to change without notice. c/f = consult factory/mtu onsite energy distributor sound data is provided at 7 m (23 ft). generator set tested in accordance with iso 8528-10 and with in nite exhaust. emissions data no x hc co pm 3.2 0.17 0.7 0.22 all units are in g/hp-hr and are epa d2 cycle values. emission levels of the engine may vary as a function of ambient temperature, barometric pressure, humidity, fuel type and quality, installation parameters, measuring instrumentation, etc. the data provided are laboratory results from one engine representing this rating. the data was obtained under controlled environmental conditions with calibrated instrumentation traceable to the united states national bureau of standards and in compliance with us epa regulations found within 40 cfr part 89. the weighted cycle value from each engine is guaranteed to be below the us epa standards at the us epa de ned conditions. rating definitions and conditions // ? standby ratings apply to installations served by a reliable utility source. the standby rating is applicable to varying loads for the duration of a power outage. no overload capability for this rating. ratings are in accordance with iso 3046-1, bs 5514, as 2789, and din 6271. // ? deration factor: altitude : consult your local mtu onsite energy power generation distributor for altitude derations. temperature : consult your local mtu onsite energy power generation distributor for temperature derations. mtu onsite energy a rolls-royce power systems brand www.mtuonsiteenergy.com
|
